API Spec 5CT - Casing and Tubing Specification

Standard System: API (American Petroleum Institute)
Current Edition: 2018, 10th
Product Category: Metal Pipe - OCTG
Test Category: Product Specification
Equivalent Standards: ISO 11960 / API Spec 5B

Description

API 5CT 10th Ed(2018)+Add 1(2020). Foundational OCTG spec: steel grades H40-Q125. Used with API 5B and RP 5B1.

Edition Notes

Current active edition.

Version reference only. No standard text.

Testing: info@leisa.com

RP 15CLT RP 5B1 Spec 5B

Same Category

RP 5B1 Spec 5B Spec 5L T 39096 632-80 3183 MR0175

More API Standards

Monogram RP 15CLT RP 15TL4 RP 15WT RP 17B RP 5B1 Spec 11B Spec 12P Spec 15HR Spec 15LE Spec 15LF Spec 15LR Spec 15LT Spec 15PX Spec 15S

Disclaimer: This page is a standards version reference. The full standard text is not reproduced due to copyright. Obtain the standard from apiwebstore.org or the respective standards body.

For formal third-party testing services, contact info@leisa.com.

How to Apply API Spec 5CT in Inspection

Applying API Spec 5CT starts with confirming the edition named in the contract, the product scope, and any purchaser-specific additions. Material system, dimensions, pressure or temperature rating, manufacturing route, and service environment should be mapped to the clauses that actually apply. Before testing, the inspection and test plan should define sampling frequency, specimen conditioning, calibrated equipment, witness points, acceptance criteria, and retest rules. A traceable report records sample and batch identity, the method and edition used, environmental conditions, raw observations, calculations, measurement uncertainty where relevant, deviations, and the decision against each requirement. This evidence chain supports purchasing acceptance, manufacturing release, engineering qualification, and dispute resolution. This page is an aid to discovery and interpretation; the current official publication remains the controlling source whenever its wording differs from this summary.

The sampling plan determines the population represented by the conclusion. Incoming inspection, first-article approval, type qualification, and production release carry different frequencies and risk levels; one selected specimen cannot stand in for a batch. Before shipment, confirm specimen count, dimensional tolerances, machining and end treatment, conditioning, and transport protection. During review, consider dispersion, failure mode, and raw curves as well as the reported average. Any anomaly should be investigated under a predefined retest rule so that an independent reviewer can reproduce the final decision.

API Spec 5CT - Casing and Tubing Specification

Description

Edition Notes

Related Standards

Same Category

More API Standards