ISO 3126 - Plastics Piping Systems - Measurement of Dimensions

Standard System: ISO
Current Edition: 2005
Equivalent Standards: GB/T 8806

ISO 3126:2005 Plastics piping systems - Measurement of dimensions. OD/ID/wall thickness/length measurement for plastic pipe and fittings. Equivalent to GB/T 8806, ASTM D2122.

Spec 15LT T 13657 T 1446 T 18369 T 228.1 T 2577 T 2828.1 T 29165 T 29165.1 T 29165.2 T 29165.3 T 29165.4

Same Category

Spec 15LE D1599 T 8806

More ISO Standards

11357-2 1172 14692-1 14692-2 14692-3 14692-4 178 23936-1 23936-2 3183 527-2

Disclaimer: This page is a standards version reference. The full text is not reproduced due to copyright. Obtain the standard from apiwebstore.org or the respective standards body.

For formal testing services, contact info@leisa.com.

How to Apply ISO 3126 in Inspection

Applying ISO 3126 starts with confirming the edition named in the contract, the product scope, and any purchaser-specific additions. Material system, dimensions, pressure or temperature rating, manufacturing route, and service environment should be mapped to the clauses that actually apply. Before testing, the inspection and test plan should define sampling frequency, specimen conditioning, calibrated equipment, witness points, acceptance criteria, and retest rules. A traceable report records sample and batch identity, the method and edition used, environmental conditions, raw observations, calculations, measurement uncertainty where relevant, deviations, and the decision against each requirement. This evidence chain supports purchasing acceptance, manufacturing release, engineering qualification, and dispute resolution. This page is an aid to discovery and interpretation; the current official publication remains the controlling source whenever its wording differs from this summary.

The sampling plan determines the population represented by the conclusion. Incoming inspection, first-article approval, type qualification, and production release carry different frequencies and risk levels; one selected specimen cannot stand in for a batch. Before shipment, confirm specimen count, dimensional tolerances, machining and end treatment, conditioning, and transport protection. During review, consider dispersion, failure mode, and raw curves as well as the reported average. Any anomaly should be investigated under a predefined retest rule so that an independent reviewer can reproduce the final decision.

ISO 3126 - Plastics Piping Systems - Measurement of Dimensions

Related Standards

Same Category

More ISO Standards