ASTM D638 - Tensile Properties of Plastics

Standard System: ASTM
Current Edition: 2022
Equivalent Standards: ISO 527-2 / GB/T 1040

ASTM D638-2022 Standard Test Method for Tensile Properties of Plastics. Referenced by API 15S for tensile qualification of reinforcement and liner/cover materials. The foundational plastics mechanical test standard.

T 13657 T 1446 T 18369 T 228.1 T 2577 T 2828.1 T 29165 T 29165.1 T 29165.2 T 29165.3 T 29165.4 T 3854

Same Category

D790 T 1446 178 527-2

More ASTM Standards

B557 B557M D1599 D2290 D2583 D2992 D2996 D3418 D3567 D790

Disclaimer: This page is a standards version reference. The full text is not reproduced due to copyright. Obtain the standard from apiwebstore.org or the respective standards body.

For formal testing services, contact info@leisa.com.

How to Apply ASTM D638 in Inspection

Applying ASTM D638 starts with confirming the edition named in the contract, the product scope, and any purchaser-specific additions. Material system, dimensions, pressure or temperature rating, manufacturing route, and service environment should be mapped to the clauses that actually apply. Before testing, the inspection and test plan should define sampling frequency, specimen conditioning, calibrated equipment, witness points, acceptance criteria, and retest rules. A traceable report records sample and batch identity, the method and edition used, environmental conditions, raw observations, calculations, measurement uncertainty where relevant, deviations, and the decision against each requirement. This evidence chain supports purchasing acceptance, manufacturing release, engineering qualification, and dispute resolution. This page is an aid to discovery and interpretation; the current official publication remains the controlling source whenever its wording differs from this summary.

The sampling plan determines the population represented by the conclusion. Incoming inspection, first-article approval, type qualification, and production release carry different frequencies and risk levels; one selected specimen cannot stand in for a batch. Before shipment, confirm specimen count, dimensional tolerances, machining and end treatment, conditioning, and transport protection. During review, consider dispersion, failure mode, and raw curves as well as the reported average. Any anomaly should be investigated under a predefined retest rule so that an independent reviewer can reproduce the final decision.

ASTM D638 - Tensile Properties of Plastics

Related Standards

Same Category

More ASTM Standards